Today I am going to share with you how to make some DIY garden planters, ready for flowers or vegetables. The sun is out, spring is in the air and we are busy sorting out the garden for summer.
Last summer we removed our semi-rotten sheds and replaced with one large shed. But naturally, that leaves pieces of an old shed to deal with – we hate to throw anything away, ideally, we like to re-purpose into something new. Our first make from the old shed was a large outdoor table which seats ten, you can read how to do this here. With plenty of pieces of the old sheds left we repurposed them into some deep upcycled garden planters.
Sign up for the newsletter for plus access to my resource library including top hints and tip sheets for selecting the correct drill piece.
DIY Garden Planters
This post contains Amazon affiliate links for your convenience. Click here to see my disclosure policy.
Measure the space you want to put the planter into and decide on the size of your finished planter.
Choose pieces of shed panelling, ensuring they are not rotten. Remove some extra sections of batten from another old section to use as a frame.
Mark out the height you want for the new planter – this one is 1 foot deep.
Place a piece of extra batten on the inside just below the top of the planter, and fix with nails. Effectively you are making a frame out of battening before cutting the section out.
Turn over, on the right side place more nails all the way along so that the tongue and groove sections of the old shed do not come apart when you cut the section out.
Using a Scorpion or similar saw cut out the planter side flush with the batten you have nailed on.
Next, make a second identical long side of the planter. You will need quite a bit of extra battening – removed from other sections of the shed.
Repeat the process to make the base, then two ends for the planter. To keep it simple we used the same size section for the base, but you could change this for a narrower or wider planter.
Predrill holes then add long screws to join the planter all together. Start with the long sides to the base, then add the ends.
Dependant upon the length of your planter add a cross piece in the middle and ends to provide additional strength, to make sure the sides do not spread apart when you add your soil.
Paint with outdoor wood paint if desired. We gave the planter 2 coats of Cuprinol wood paint, so no undercoat is required.
Line your DIY garden planters with a pond liner or similar plastic sheeting to preserve the life of the planter (so the wood is not constantly wet). This was trimmed to size and secured just below the rim with a staple gun. We used a thick pond liner to help make sure the sides do not spread apart when the soil is added, again because of the depth and the amount of soil involved. Fill with soil and add plants.
You could add a false bottom and make the planter half as deep if you just want to grow small plants. If you do this you could also use a much cheaper liner – like strong refuse sacks. We used pond liner and went for full depth, so we have the option in the future of growing larger shrubs or vegetables that need extra depth.
We love having handmade upcycled items around our garden, check out our garden chair, and our cable reel planter. Internally I have some cool, if I say so myself, glass bottle upcycle planters and tea set succulent planter.